Fast Installation LED Panel Suspension Kit Aircraft Cable Mounting
Kit With Hook
The LED Panels can be suspended or surfaced mounted,
Stainless steel wire suspension kit for use with LED Panels,
and many other ultra slim LED panel lights allowing the panel to be
hung from a ceiling.
Our easy to use suspension kit systems allow for almost any
luminaire design to be
suspended quickly and easily, allowing for creative lighting
designs to be achieved.
· Flexible suspension kits
· Simple and effective method of changing luminaire height and
· Complete assembly is available from one source
· Long-lasting quality
1. Material: Brass+Stainless Steel Wire
2. Size: Same as the drawing
3. Cable Diameter and Length:Ø1.5*1000mm;Or Customize
4. Finishing Color: Nickel;Or Customize
Suspension kits with adjustable gripper and Stainless Steel Wire,
Can be used to hang Linear Lights,LED Panels and many other
Offer the perfect solution for the suspension of the fixtures.
6. Safe Working Load:30KG(Fore reference only)
One Adjustbale cable gripper hook,adjust the cable length;
One 304 Stainless Steel wire with diecast end and loop end
LOOP END SIZE
L:39″ – (1000MM)
Installing your display is as easy as ever with the Self-Gripping
You can use the Ceiling Fastener to mount your cable to the ceiling
or floor or use
it as a mount below your shelving.
Adjusting the position of the hook is as simple as pressing down
the button on the top
of the hook, then sliding it into the desired location and
releasing the button.
While pressing down the button on the top of the hook, simply
thread the cable through the hook,
and release the button when at the desired length. Push back the
Safety Lock, insert your frame
hanger, then release the Safety Lock. Step back and admire your
marvelous Hanging System!
Our suspension Cable Kits make setting up your perfect system that
Find the right kit for you, then simply add your Cable Supports and
get ready to be amazed!
The elegant finishes that we carry will give your display a unique
look that will make it
stand out like no other.
What components do I need to hang my fixtures?
You will need a ceiling attachment (cable coupler or connector), a
cable with a terminal
(stop sleeve) and a Cable Gripper, normally placed at the fixture.
You may also need
ceiling canopies and power cord.
Can I install these myself?
Yes, if you’re a lighting professional or a competent handyman.
After you mark your installation location, install your anchors if
needed, then simply secure
the Ceiling Fastener down with a screw through each of the 3 holes
in the base.
To install your cable, just push the button down on the top of the
and release in the desired location!