Key Flange Cap Grip Lock Cable Grippers Brass Material Nickel
Plated With Safety Lock
Cable Grippers are sophisticated in design but simple to use to
hang your pictures or fine art.
1. Item Name:Key Flange Cap Grip Lock Cable Grippers
4. Thread Size:M13Thread
5. Finishing Color:Nickel;Or Customize
Use for a huge range of suspension applications from ducting,
shopfitting & suspended systems.
7. Safe Working Load:10KG(For reference only)
Ø0.63'' * 0.67''
(Ø16 * 17MM)
Cable Gripper Design
Within each cable gripper is a plunger that a cable slides through.
There are three balls that
surround the outside diameter of the cable as it passes through the
gripper. When weight is
applied to the gripper when mounted, the tension forces the balls
to grab the cable in a pinching movement. In normal operation the
more the tension, the more the gripping. Some grippers come
with a safety nut that locks the movement in both directions
eliminating the potential for a release
if the plunger is accidentally depressed by an end user.
IF THIS IS THE FIRST TIME YOU’VE WORKED WITH 3-BALL AIRCRAFT CABLE
COMPRESSION SYSTEMS, PLEASE READ THE FOLLOWING CAREFULLY.
When feeding cable into the Gripper, always allow it to pass at
least 1” beyond the body of the Gripper.
When cutting off excess cable always leave at least 1” of cable
showing. Cables may be cut using purpose-built cutters. Cable will
not fray unless passed repeatedly through the Gripper mechanism or
otherwise abused. To prevent fraying of freshly cut ends, re-solder
or apply a drop of super-glue.
DO NOT FEED EXCESS CABLE INTO A LIGHTING FIXTURE HOUSING OR
BOX CONTAINING ELECTRICAL WIRING.
Use only 7×7 or 7×19 uncoated galvanized or stainless steel
When installing threaded Grippers DO NOT OVER-TORQUE THE THREADS.
Finger-tighten only and wrench-tighten a quarter turn further, but
The product is not recommended for outdoor use. It should not be
exposed to water or wind,
or be allowed to oscillate continuously in any circumstance. Avoid
placing fixtures close to HVAC
vents or in chemical-laden environments such as indoor swimming
For more information please contact us.
WARNING: Do not place pendant fixtures in moving-air environments
unless they are
laterally/seismically braced. Continuous oscillation may cause
metal fatigue in the
cabling systems, leading to cable failure.
Grippers & couplers work best when cable follows their center
line. Avoid angled pulls in excess of 5°.
For angled applications use one of our jointed grippers or our
sloped ceiling couplers.